You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
298 lines
7.5 KiB
298 lines
7.5 KiB
3 years ago
|
/*
|
||
|
|
*******************************************************************************
|
||
|
|
* Copyright (c) 2017, STMicroelectronics
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions are met:
|
||
|
|
*
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "pins_arduino.h"
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
const PinName digitalPin[] = {
|
||
|
|
PB_12,
|
||
|
|
PB_13,
|
||
|
|
PB_14,
|
||
|
|
PB_15,
|
||
|
|
PD_8,
|
||
|
|
PD_9,
|
||
|
|
PD_10,
|
||
|
|
PD_11,
|
||
|
|
PD_12,
|
||
|
|
PD_13,
|
||
|
|
PD_14,
|
||
|
|
PD_15,
|
||
|
|
PG_2,
|
||
|
|
PG_3,
|
||
|
|
PG_4,
|
||
|
|
PG_5,
|
||
|
|
PG_6,
|
||
|
|
PG_7,
|
||
|
|
PG_8,
|
||
|
|
PC_6,
|
||
|
|
PC_7,
|
||
|
|
PC_8,
|
||
|
|
PC_9,
|
||
|
|
PA_8,
|
||
|
|
PA_9,
|
||
|
|
PA_10,
|
||
|
|
PA_11,
|
||
|
|
PA_12,
|
||
|
|
PA_13,
|
||
|
|
PA_14,
|
||
|
|
PA_15,
|
||
|
|
PC_10,
|
||
|
|
PC_11,
|
||
|
|
PC_12,
|
||
|
|
PD_0,
|
||
|
|
PD_1,
|
||
|
|
PD_2,
|
||
|
|
PD_3,
|
||
|
|
PD_4,
|
||
|
|
PD_5,
|
||
|
|
PD_6,
|
||
|
|
PD_7,
|
||
|
|
PG_9,
|
||
|
|
PG_10,
|
||
|
|
PG_11,
|
||
|
|
PG_12,
|
||
|
|
PG_13,
|
||
|
|
PG_14,
|
||
|
|
PG_15,
|
||
|
|
PB_3,
|
||
|
|
PB_4,
|
||
|
|
PB_5,
|
||
|
|
PB_6,
|
||
|
|
PB_7,
|
||
|
|
PB_8,
|
||
|
|
PB_9,
|
||
|
|
PB_10,
|
||
|
|
PB_11,
|
||
|
|
PE_14,
|
||
|
|
PE_15,
|
||
|
|
PE_12,
|
||
|
|
PE_13,
|
||
|
|
PE_10,
|
||
|
|
PE_11,
|
||
|
|
PE_8,
|
||
|
|
PE_9,
|
||
|
|
PG_1,
|
||
|
|
PE_7,
|
||
|
|
PF_15,
|
||
|
|
PG_0,
|
||
|
|
PF_13,
|
||
|
|
PF_14,
|
||
|
|
PF_11,
|
||
|
|
PF_12,
|
||
|
|
PB_2,
|
||
|
|
PB_1,
|
||
|
|
PC_5,
|
||
|
|
PB_0,
|
||
|
|
PA_7,
|
||
|
|
PC_4,
|
||
|
|
PA_5,
|
||
|
|
PA_6,
|
||
|
|
PA_3,
|
||
|
|
PA_4,
|
||
|
|
PA_1,
|
||
|
|
PA_2,
|
||
|
|
PC_3,
|
||
|
|
PA_0,
|
||
|
|
PC_1,
|
||
|
|
PC_2,
|
||
|
|
PC_0,
|
||
|
|
PF_8,
|
||
|
|
PF_6,
|
||
|
|
PF_7,
|
||
|
|
PF_9,
|
||
|
|
PF_10,
|
||
|
|
PF_4,
|
||
|
|
PF_5,
|
||
|
|
PF_2,
|
||
|
|
PF_3,
|
||
|
|
PF_0,
|
||
|
|
PF_1,
|
||
|
|
PE_6,
|
||
|
|
PC_13,
|
||
|
|
PE_4,
|
||
|
|
PE_5,
|
||
|
|
PE_2,
|
||
|
|
PE_3,
|
||
|
|
PE_0,
|
||
|
|
PE_1,
|
||
|
|
PC_14,
|
||
|
|
PC_15,
|
||
|
|
};
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
// ----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define __fatal_error(X)
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief System Clock Configuration
|
||
|
|
*
|
||
|
|
* The system Clock is configured for F4/F7 as follows:
|
||
|
|
* System Clock source = PLL (HSE)
|
||
|
|
* SYSCLK(Hz) = 168000000
|
||
|
|
* HCLK(Hz) = 168000000
|
||
|
|
* AHB Prescaler = 1
|
||
|
|
* APB1 Prescaler = 4
|
||
|
|
* APB2 Prescaler = 2
|
||
|
|
* HSE Frequency(Hz) = HSE_VALUE
|
||
|
|
* PLL_M = HSE_VALUE/1000000
|
||
|
|
* PLL_N = 336
|
||
|
|
* PLL_P = 2
|
||
|
|
* PLL_Q = 7
|
||
|
|
* VDD(V) = 3.3
|
||
|
|
* Main regulator output voltage = Scale1 mode
|
||
|
|
* Flash Latency(WS) = 5
|
||
|
|
*
|
||
|
|
* The system Clock is configured for L4 as follows:
|
||
|
|
* System Clock source = PLL (MSI)
|
||
|
|
* SYSCLK(Hz) = 80000000
|
||
|
|
* HCLK(Hz) = 80000000
|
||
|
|
* AHB Prescaler = 1
|
||
|
|
* APB1 Prescaler = 1
|
||
|
|
* APB2 Prescaler = 1
|
||
|
|
* MSI Frequency(Hz) = MSI_VALUE (4000000)
|
||
|
|
* LSE Frequency(Hz) = 32768
|
||
|
|
* PLL_M = 1
|
||
|
|
* PLL_N = 40
|
||
|
|
* PLL_P = 7
|
||
|
|
* PLL_Q = 2
|
||
|
|
* PLL_R = 2 <= This is the source for SysClk, not as on F4/7 PLL_P
|
||
|
|
* Flash Latency(WS) = 4
|
||
|
|
* @param None
|
||
|
|
* @retval None
|
||
|
|
*
|
||
|
|
* PLL is configured as follows:
|
||
|
|
*
|
||
|
|
* VCO_IN
|
||
|
|
* F4/F7 = HSE / M
|
||
|
|
* L4 = MSI / M
|
||
|
|
* VCO_OUT
|
||
|
|
* F4/F7 = HSE / M * N
|
||
|
|
* L4 = MSI / M * N
|
||
|
|
* PLLCLK
|
||
|
|
* F4/F7 = HSE / M * N / P
|
||
|
|
* L4 = MSI / M * N / R
|
||
|
|
* PLL48CK
|
||
|
|
* F4/F7 = HSE / M * N / Q
|
||
|
|
* L4 = MSI / M * N / Q USB Clock is obtained over PLLSAI1
|
||
|
|
*
|
||
|
|
* SYSCLK = PLLCLK
|
||
|
|
* HCLK = SYSCLK / AHB_PRESC
|
||
|
|
* PCLKx = HCLK / APBx_PRESC
|
||
|
|
*
|
||
|
|
* Constraints on parameters:
|
||
|
|
*
|
||
|
|
* VCO_IN between 1MHz and 2MHz (2MHz recommended)
|
||
|
|
* VCO_OUT between 192MHz and 432MHz
|
||
|
|
* HSE = 8MHz
|
||
|
|
* M = 2 .. 63 (inclusive)
|
||
|
|
* N = 192 ... 432 (inclusive)
|
||
|
|
* P = 2, 4, 6, 8
|
||
|
|
* Q = 2 .. 15 (inclusive)
|
||
|
|
*
|
||
|
|
* AHB_PRESC=1,2,4,8,16,64,128,256,512
|
||
|
|
* APBx_PRESC=1,2,4,8,16
|
||
|
|
*
|
||
|
|
* Output clocks:
|
||
|
|
*
|
||
|
|
* CPU SYSCLK max 168MHz
|
||
|
|
* USB,RNG,SDIO PLL48CK must be 48MHz for USB
|
||
|
|
* AHB HCLK max 168MHz
|
||
|
|
* APB1 PCLK1 max 42MHz
|
||
|
|
* APB2 PCLK2 max 84MHz
|
||
|
|
*
|
||
|
|
* Timers run from APBx if APBx_PRESC=1, else 2x APBx
|
||
|
|
*/
|
||
|
|
void SystemClock_Config(void)
|
||
|
|
{
|
||
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||
|
|
|
||
|
|
__PWR_CLK_ENABLE();
|
||
|
|
|
||
|
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
||
|
|
clocked below the maximum system frequency, to update the voltage scaling value
|
||
|
|
regarding system frequency refer to product datasheet. */
|
||
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||
|
|
|
||
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||
|
|
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
|
||
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||
|
|
clocks dividers */
|
||
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||
|
|
|
||
|
|
RCC_OscInitStruct.PLL.PLLM = 25;
|
||
|
|
RCC_OscInitStruct.PLL.PLLN = 336;
|
||
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||
|
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||
|
|
|
||
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||
|
|
|
||
|
|
if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||
|
|
__fatal_error("HAL_RCC_OscConfig");
|
||
|
|
}
|
||
|
|
|
||
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||
|
|
{
|
||
|
|
__fatal_error("HAL_RCC_ClockConfig");
|
||
|
|
}
|
||
|
|
|
||
|
|
/**Configure the Systick interrupt time */
|
||
|
|
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
|
||
|
|
|
||
|
|
/**Configure the Systick */
|
||
|
|
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
|
||
|
|
|
||
|
|
/* SysTick_IRQn interrupt configuration */
|
||
|
|
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|